MPO / MTP TRUNK CABLE

Designed as a cable assembly integrated with multiple MTP/MPO patchcord cables, the D-CONNECT MTP/MPO trunk cable is typically for used inter building and intra building backbone cabling runs where cable distances are predictable. It is fully configurable, available with a variety of cable and connector combinations, including connector type, breakout configurations and jacket material.

D-CONNECT Trunk Cable is part of high density structure cabling solution in data center, there are MPO to MPO and MPO to hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. MPO/MTP trunk cable are terminated and tested guaranteed quality for your data

MPO / MTP HARNESS CABLE

D-CONNECT MPO / MTP harness cables are designed as a cable assembly used for fan-out or breakout in data center interconnects. Our MTP/MPO harness cable is fully configurable, available with a variety of cable and connector combinations, including connector typeS (LC, SC, FC, ST, MTRJ, etc.), breakout configurations and jacket material. Available in 8/12/24/48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.

MPO / MTP HYDRA CABLE

D-CONNECT MPO / MTP hydra cable assemblies, is deployed inside plug and play cassette modules. This solution is a 12-colored 0.9mm cable utilizing a MPO / MTP connector on one end and generic connectors (such as LC, SC, FC, etc.) on the other end. They are available for purchase as a bundle with D-CONNECT’s cassette modules, MPO / MTP Adapter Plates, and other solutions. Available in 8/12/24 fibers versions as well as Multi-mode (Standard 50/125, 62.5/125) and Single-mode fiber types.

MPO / MTP PATCHCORD CABLES

D-CONNECT MTP/MPO Patchcord Cables are multi-fiber cables using the MTP/MPO connectors. Each cable has a Male or Female MTP/MPO connector on each end. The MTP/MPO patchcord cable is used for 40G/100G/200G/400G data center cabling. With highly integrated design and manufacturing capability, we provide customised MTP/MPO patch cables which are 100% tested to deliver optimal performance and reliability.

MULTI FIBER LOOSE TUBE CABLE ASSEMBLIES

D-CONNECT offers multi-fiber cable assemblies – terminating a wide variety of indoor and outdoor cables with various connector styles. These cable assemblies can be used as pre-terminated backbones with connectors at each end or leave one end open for splicing at the transition from outdoor to indoor cable.

Trunk cable assemblies are a key component in today’s dense fiber optic networks. Standard cable styles and connectors are stocked and can be quickly assembled for your most pressing needs. Fiber Connections assembles trunk cables with any combination of multi-fiber and single fiber connectors. The finished assemblies save time and costs at the installation site.

Custom labeling is available to make installation clear and simple. Once completed and tested, each assembly is wound onto a shipping reel for quick and easy installation. A ruggedized pulling eye, offered as an option, provides protection for the connectors and easy installation.

MULTI FIBER FULL BREAKOUT CABLE ASSEMBLIES

Multicore full breakout cable assemblies are ideal for short cable runs where a direct connection to equipment or panels is required. The 2mm patch lead style cable subunits are ruggedised, to protect the optical fiber in the demanding environments outside the patch panel or ODF. The network topology can be reduced and simplified by direct connection; bypassing wall boxes, ODFs or fibre patch panels, The end result is greatly improved fibre management.

D-CONNECT’S Fan-out/break-out fiber cable assemblies deliver the performance and reliability needed in today’s demanding high-speed broadband and data networks. We manufacture many variations to choose from to fit your precise applications: MPO-to-LC, MPO-to-SC, MPO-to-MPO, LC-to-LC, LC-to-SC, and more! Performance is always guaranteed since all of our cable assemblies have been tested for compliance with TELCORDIA GR-1435, GR-2866, IEC-61754-7 and EIA/TIA-604-5.

MULTI FIBER DISTRIBUTION (TIGHT BUFFERED) CABLE ASSEMBLIES

The system consists of standard internal / external tight buffered distribution cable, which is supplied in specific lengths for each cable run in an installation. This cable is available in multimode or singlemode with fibre counts of 4, 8, 12, 16 or 24.

The cable is factory prepared in our in-house facility with a gland on each end which is epoxy bonded onto the Kevlar Strain Relief Yarn in the cable. The secondary coated fibres are terminated with either ST, SC, LC or FC-PC connectors which are fully tested and certified under our quality system. This ensures that the quality of the complete cable assembly is guaranteed before shipping to site.

A specially developed termination protection sleeve is fitted to each end of the cable assembly to protect the connectors during shipping and installation. This sleeve has a small diameter and is flexible, lightweight and extremely rugged. The protection sleeve connects onto the epoxy bonded cable gland and can withstand the high tensile loads applied when pulling cables through ducts. A pulling eye is incorporated to allow the attachment of a draw cable.

After cable installation, the protection sleeves are removed and the connectors are threaded through the gland hole of any cable management enclosure. A gland nut is used to secure the cable gland in place. Then the connectors are simply connected to the adaptors inside the enclosure to complete the installation.

MICRO CABLE ASSEMBLIES (2MM TAILS)

Micro cable ruggedised pre-terminated assemblies with 2mm tails features low loss optical performance, while the 2mm tail structure is ideal for application where the cable is non-protected, ex. Outside patch panel, ODF and wall boxes. The overall small and compact size of these assemblies improves cable management and allow air flow in rack system.

MICRO CABLE ASSEMBLIES (900UM TAILS)

Micro Cable assembly features a small, compact size of Micro Cable providing flexible though ruggedized product with the improved optical performance of Micro Cable structure. 900μm tails are ideal for application inside patch panels, ODFs or wall boxes improving fibre management.

FAN-OUT KITS

Indoor Buffer Tube Fan-Out Kits are specifically designed for the termination of 6- and 12-fiber buffer tubes. These buffer tube fan-out kits provide the ultimate solution for those users who want to field-install connectors on 250 µm coated fibers. The kits provide the most compact, easy-to-install fan-out solution requiring no additional hardware or space than that required for terminating tight-buffered cables. Indoor Kits feature a 900 µm Fan-Out Assembly that is color-coded to match the fiber color scheme. The Fan-Out Assembly is available with 6- or 12-fiber units in lengths of 0.6 m (25-in) or 1.2 m (47-in). These different lengths provide the installer the flexibility needed for a variety of hardware options.

SINGLE MODE PATCHCORD

Single mode fiber optic patch cables use 9/125 micron bulk single mode fiber cable and single mode fiber optic connectors at both ends. Single mode fiber optic cable jacket color is usually yellow.

MULTI MODE PATCHCORD

Multimode patch cords are used to connect high speed and legacy networks like 10/40/100 gigabit ethernet, fast ethernet and ethernet. Multimode patch cords are manufactured for internal use using LSZH, OFNR or OFNP cable and conform to EIA TIA or IEC standards.

ARMOURED PATCHCORD

Armored fiber optic patch cables retain all the features of standard patch cords, but are much stronger. Armored fiber optic patch cables will not get damaged even if stepped by an adult and they are rodent-resistant. By using an armored patch cable you don’t need to worry about rodents like rats that may bite the cables. Armored fiber optic cables are strong; they are actually as flexible as standard fiber optic patch cords. Armored fiber optic patch cords are made a with similar outer diameter to standard patch cords, make them both space saving and strong. What’s more, they can be made with different jacket colors and jacket types such as OFNR etc. Armored fiber optic patch cords can be made with LC, SC, FC, ST, LC/APC, SC/APC, FC/APC and other types of connectors.

The products below are just some of the options we offer. We manufacture armored fiber optic patch cables with any connector configuration in singlemode or multimode and in any length you need, so if you don’t see what you want below, give us a call or e-mail us to get a quote on custom armored patch cables. At the bottom of the page is a part number generator for your convenience as well to make the duplex or simplex armored patch cable to fit your needs.

MODE CONDITIONING PATCHCORD

Mode Conditioning Patchcords are used to connect multimode fiber plants that use transceiver modules. They are needed because transceiver modules use a singlemode launch condition even when they are being used with multimode fiber. These cables are easily installed without any additional fiber optic equipment. When the transmit signal is launched down the center of the core of the multimode fiber it will cause multiple signals to be generated and cause errors. When these multiple signals reach the receiver at the other end of the cable, the receiver becomes confused and cannot read the signal correctly. The mode conditioning cord eliminates the multiple signals. It allows the singlemode launch to be offset from the center of the multimode fiber so that the signal launch is closer to a multimode launch condition. It should be noted that an MC cord should be used in pairs at each end of the connection.

SINGLE MODE PIGTAILS

Fiber optic pigtail is a fiber optic cable terminated with a factory-installed connector on one end, leaving the other end unterminated. Hence the connector side can be linked to equipment and the other side melted with optical fiber cables. Fiber optic pigtail are utilized to terminate fiber optic cables via fusion or mechanical splicing. High quality pigtail cables, coupled with correct fusion splicing practices offer the best performance possible for fiber optic cable terminations. Fiber optic pigtails are usually found in fiber optic management equipment like ODF, fiber terminal box and distribution box. Single mode fiber pigtail is mostly yellow, there are two wavelengths, 1310nm and 1550nm, transmission distance of 10km and 40km.

MULTI MODE PIGTAILS

D-CONNECT multimode pigtails are used to connect high speed networks like gigabit ethernet, fast ethernet and ethernet. The multimode pigtail buffer conforms to IEC, EIA TIA or Telcordia standards. The multimode pigtails are terminated with high quality connector which gives optimum optical performance.

PACK OF 12 COLOURED PIGTAILS

Designed specifically for fusion splicing to most fibre types and commonly used for termination purposes of Loose Tube Cables the D-CONNECT pigtail range is the optimal choice when quality and reliability are of the utmost importance. Using only the highest quality fibre TNS manufactures a broad range of Optical Fibre Pigtails meeting the needs of the communications industry. All assemblies are fully tested prior to delivery to ensure customer satisfaction. Most pigtails types are available as single pigtails. Alternatively pigtails can be supplied in packs of 6 or 12 pigtails colour coded to IEC specifications allowing for easy installation and easy identification of each individual fibre. These are commonly known as rainbow packs. Most common connector types are stocked with a 2 metre length as standard allowing for fast delivery times.

ACTIVE OPTICAL CABLE (AOC)

Active Optical Cable (AOC) is a cabling technology that accepts same electrical inputs as a traditional copper cable, but uses optical fiber “between the connectors”. AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility with standard electrical interfaces.

Simply put, Active Optical Cable (AOC) assemblies were invented to replace copper technology in data centers and high performance computing (HPC) applications. So the basic idea of AOC is to embed the active optical transceiver components into the electronic connector instead of using separate optical transceiver and pluggable fiber cable. (since the cable is permanently attached).

SINGLE LOOSE TUBE CST WITH E-GLASS

Corrugated steel tape CLT fibre optic cable with upto 24 x 250µm fibres within a gel filled central tube with water blocking glass yarns. Inner sheath of PE, corrugated steel tape Armour (CST), Outer PE sheath but other materials and colours are available upon request. Universal distribution corrugated steel tape CLT fibre optic cable is typically used in building backbone application networks where cables may be at medium risk of mechanical damage.

SINGLE LOOSE TUBE FIBER OPTIC CABLE (2-24 FIBERS)

D-CONNECT’s range of Central Loose Tube fibre optic cables are suitable for use on backbone networks. Our range includes Fibre counts from 2F up to 24F in OM1, OM2, OM3, OM4, & OS1/2 Fibre types. With options for Standard (non armour), corrugated steel or steel wire armours for protection. All products are available as PE or LSZH.

SINGLE LOOSE TUBE FIBER OPTIC CABLE (2-24 FIBERS) - CPR

2 to 24 fibre OM1, OM2, OM3, OM4 multimode or OS1/OS2 ITU-T G.652D, G.657A1 or G.657A2 single mode 250 µm single loose tube internal/external duct cables with e-glass strength members and Low Smoke Zero Halogen (LSZH) jacket.The single loose tube cables consist of 2 to 24, 250 µm optical fibres in a single gel filled loose tube with e-glass non metallic strength members and black LSZH, UV resistant jacket. Euroclass DCA-S2, D1, A1

MULTI LOOSE TUBE CST FIBER CABLE

Description:

D-CONNECT’s range of Multi Loose Tube fibre optic cables are suitable for use on backbone networks. Our range includes Fibre counts from 8F up to 288F in OM1, OM2, OM3, OM4, & OS1/2 Fibre types. With options for Standard (non armour), corrugated steel or steel wire armours for protection. All products available as PE or LSZH. Corrugated steel tape Multi Loose Tube fibre optic cable is typically used in building backbone application networks in medium risk harsh environments with high fibre counts.

MULTI LOOSE TUBE FIBER CABLE

The multi loose tube cable construction consists of 250µm optical fibers in 8 / 12 fiber gel filled loose tubes with fillers where appropriate, SZ stranded around a fiber reinforced plastic (FRP) central strength member with water repelling threads and water repelling tape. Helically applied waterblocking e-glass non metallic strength members with ripcord and black polyethylene (PE) or Low Smoke Zero Halogen (LSZH) jacket. Multi Loose Tube fibre optic cable is typically used in building backbone application networks in high risk harsh environments with high fibre counts.

DUAL JACKET SINGLE LOOSE TUBE CST

The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a Corrugated Steel Tape (CST) armoring and Polyethylene (PE) outer sheath.

DUAL JACKET MULTI LOOSE TUBE CST

The multi loose tube cable construction consists of up to 12 elements and a maximum of 144, 250µm optical fibers in 12 fiber gel filled loose tubes with fillers where appropriate, SZ stranded around a fiber reinforced plastic (FRP) central strength member with waterswellable threads and waterswellable tape. Helically applied water blocking e-glass non-metallic strength members with ripcord and PE inner jacket, corrugated steel tape (CST) armoring and black high density polyethylene (HDPE) final jacket with ripcord.

SINGLE JACKET MICRO CABLE

D-CONNECT’S Multitube Single Jacket Fibre Optic Cables are typically used in micro duct or aerial drop installation applications. This cable is a stranded micro loose tube cable with optical fibre placed inside robust buffer tubes stranded around a fibre reinforced plastic (FRP) central strength member. In addition to optical fibres, the buffer tubes contain water blocking gel and the cable core is surrounded with water-swellable tape to prevent water ingress in the interstices of cable
core. The cable core is surrounded with thermoplastic sheath or Polyamide jacket making the cable robust and installation friendly.

These cables are typically used for Access / Metro and (air blown) Drop cabling for FTTx networks, like Fibre to the Home (FTTH). Microcables can utilise existing and new duct systems more effectively by accommodating more fibres in given sub-duct network.

DOUBLE JACKET MICRO CABLE

2 to 24 fibre 250µm Micro Cables with aramid strength members and double LSZH jackets. The cables consist of 2 to 24, 250um OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D), ITU-T G.657A1 & ITU-T G.657A2 singlemode optical fibres in a 2.95mm Low Smoke Zero Halogen (LSZH) inner jacket with aramid strength members. Aramid non metallic strength members and final 4.5 mm LSZH jacket.

FTTx FLAT DROP CABLE

D-CONNECT Flat FTTH Drop Cable is used in high speed and broadband telecommunication applications. It is suitable for both indoor and outdoor applications. The indoor fiber construction comprises of 1, 2, 4 cores optical fibers, 2 parallel FRP (Fiber Reinforced Steel/Plastic) strength member and LSZH Jacket. Outdoor FTTH flat cable construction is similar to the indoor cable, except the cable jacket is made of Flame Retardant Black PE and has a supporting wire for aerial installation.
Fiber used in these cables are bend insensitive and can be used for applications where multiple bends are present. These light weight cables are suitable for direct installation in Villas, Multi dwelling units and have excellent crush and impact resistance properties. 1 Core to 12 core drop cables are available.

4 FIBER ALL DIELECTRIC FTTH LTDC

D-CONNECT all dielectric FTTH indoor/outdoor drop cable containing 1, 2 or 4, 250 µm optical fibers is manufactured using selected G.652D or G.657A or G.657A2 fibers in a single gel filled loose tube, water-blocking E-glass non metallic strength members and white Low Smoke Zero Halogen (LSZH) or black Polyethylene (PE) jacket. Available in black (outdoor) or white (indoor) colour options.

SIMPLEX FIBER OPTIC PATCH CABLE

A simplex fiber optic cable consists of one single strand of glass of plastic fiber and one single outer jacket. Utilising 600 µm or 900 µm buffered fiber, the cable is suitable for use with industry standard connectors and can be easily made into a patch cords. Simplex fiber is most often used for applications that only require one-way data transfer. Digital data readouts, interstate highway sensor relays, and automated speed and boundary sensors (for sports application) are all great uses of simplex fiber optic cable. There are available in simplex single mode and simplex multimode fiber optic cable. Single mode simplex fiber patch cable is a great option for setting up a cable network that will require data to travel in one direction over long distances. Since this simplex optical fiber cable only carries one ray of light at a time, it’s better for long-distance transmissions. The simplex multimode fiber has a larger diameter core that effectively allows multiple modes of light to propagate. The number of light reflection is created due to a larger diameter. Multimode fiber is used for short distance data transmission purposes.

ROUND DUPLEX FIBER OPTIC PATCH CABLE

Round duplex fiber optic patch cable is constructed with two tight buffered fibers protected by aramid yarns and an LSZH jacket. This cable is available in Riser, Plenum, both RoHS compliant. Ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets). Utilising 600 µm or 900 µm buffered fiber, the cable unit is suitable for use with industry standard connectors and can be easily made into a patch cord.

TIGHT BUFFERED DISTRIBUTION CABLE

Tight-buffered fiber distribution cable consists of several tight-buffered fibers consolidated in a single cable. Compared with the bare fiber, the tight-buffered fiber is coded with an additional 900um layer over the 250um fibers for protection. Generally, the tight-buffered distribution cable comes in various fiber counts ranging from 2 to 144 fibers. According to different application requirements, these cables are usually plenum (OFNP) or riser (OFNR) rated but can also be constructed as an indoor/outdoor or low-smoke (LSZH) cable. These cables are intended for riser application in multi storey buildings and are an integral part of the end-to-end fiber optic solution, designed to support enhanced data needs along with future advancing network requirements.

BREAKOUT FIBER OPTIC CABLE (4-24 FIBERS)

In breakout cable, a tightly buffered fiber is surrounded by aramid yarn and a jacket, typically PVC. These single-fiber subunit elements are then covered by a common sheath to form the breakout cable. They are made of several simplex cables bundled together inside a common jacket. This is a strong and rugged design. It is suitable for conduit runs, riser and plenum applications. It’s perfect for industrial applications where ruggedness is needed. “The cable within a cable” and because each fiber is individually reinforced, this design allows for quick termination to connectors and does not require patch panels or boxes. Breakout cable can be more economic where fiber count isn’t too large and distances too long, because is requires so much less labor to terminate. Breakout cable is a favorite where rugged cables are desirable or direct termination without junction boxes, patch panels or other hardware is needed.

CST DISTRIBUTION CABLE (4-24 FIBERS)

The CST Armoured Distribution cables consist of 4 to 24, 900 µm tight buffered optical fibers with longitudinally applied waterblocking E-glass non metallic strength members and low smoke zero halogen (LSZH) inner jacket. Corrugated steel tape armor and outer black LSZH jacket.

SINGLE LOOSE TUBE FIBER OPTIC CABLE
(2-24 FIBERS) - CPR

D-CONNECT’s range of Central Loose Tube fibre optic cables are suitable for use on backbone networks. Our range includes Fibre counts from 2F up to 24F in OM1, OM2, OM3, OM4, & OS1/2 in ITU-T G.652D, G.657A1 or G.657A2 fibre types. The single loose tube cables consist of 2 to 24, 250µm optical fibers in a single gel filled loose tube with e-glass non metallic strength members and black LSZH, UV resistant jacket. Euroclass Dca-s2,d1,a1

SINGLE LOOSE TUBE CST FIBER OPTIC CABLE
(2-24 FIBERS) - CPR

D-CONNECT’s Steel Tape Armoured (STA) Single Loose Tube (SLT) Cable family offers up to 24 fibres in a compact cable construction. CST (Corrugated Steel Tape Armour) cable is offered in OM1, OM2, OM3, OM4 multimode or OS1 / OS2 (ITU-T G.652D, G.657A1 or G.675A2) single mode. It has a similar design to Loose Tube cable but it can be use for direct burial applications and offers protection against rodent damage. The cable consists of an internal loose tube, within this tube there is a bundle of 250µm fibres that either have a gel or water absorbent powder to protect the fibre against water ingress, longitudinally applied waterblocking E-glass non metallic strength members then a Steel Tape for extra protection and then a UV stable LSZH outer sheath. The cables have embedded strength members for anti buckling property. The cables can also be offered with steel wire as embedded strength member to provide higher tensile strength. Euroclass Cca-s1a,d1,a1.

MULTI LOOSE TUBE FIBER OPTIC CABLE - CPR

Multitube Single Jacket Fibre Optic Cables are suitable for duct applications. This
cable is a stranded loose tube cable with optical fibres placed inside robust buffer tubes stranded around a fibre reinforced plastic (FRP) central strength member. In addition to optical fibres, the buffer tubes contain water blocking gel and the cable core is surrounded with water-swellable tape to prevent water ingress in the interstices of cable core. The cable core is surrounded with thermoplastic sheath making the cable robust and installation friendly. Euroclass Dca s2 d1 a1. These cables are suitable for internal and external applications in ducts and are Ideal for intra building links in campus environments.

MULTI LOOSE TUBE CST FIBER OPTIC CABLE - CPR

Multi loose tube Single Jacket Steel Tape Armored Cables are suitable for direct burial as well as for duct applications. This cable is a stranded loose tube cable with optical fibres placed inside robust buffer tubes, stranded around a fibre reinforced plastic (FRP) central strength member. In addition to optical fibres, the buffer tubes contain water blocking gel, and the cable core is surrounded with water-swellable tape to prevent water ingress in the interstices of cable core. Corrugated steel tape (CST) armour surrounds the cable core with thermoplastic jacket bonded over the armour layer making the cable robust and installation friendly.

TIGHT BUFFERED FIBER OPTIC CABLE
INDOOR - CPR

Tight Buffer Riser Cables are an integral part of the end-to-end fiber optic solution, designed to support enhanced data needs along with future advancing network requirements.These cables are intended for riser application in multi storey buildings. 900 µm Tight buffered fibres are reinforced with aramid yarns and sheathed with Low Smoke Zero Halogen (LSZH). Euroclass Cca-s1a,d1,a1. These cables are specifically designed for indoor applications, mainly used in intra-building backbones in riser and horizontal configurations, routing between telecommunications rooms, as a riser cable in Multi Storey buildings and also for indoor cabling installlation in trunking, under floor or ceiling spaces. Ideal fiber drop cable.

TIGHT BUFFERED DISTRIBUTION CABLE - CPR

Tight-buffered fiber distribution cable consists of several tight-buffered fibers consolidated in a single cable. The tight-buffered fiber is coated with an additional 900µm layer over the 250µm fibers for protection and is surrounded by waterblocking e-glass strength members jacketed in an LSZH outer jacket. Generally, the tight-buffered distribution cable comes in various fiber counts ranging from 4 to 24 fibers. Euroclass Dca-s1,d1,a1

DOUBLE JACKET MICRO CABLE
(2-24 FIBERS) - CPR

2 to 24 fibre 250µm Micro Cables with aramid strength members and double LSZH jackets. The cables consist of 2 to 24, 250um OM1, OM2, OM3, OM4 multimode or OS1/OS2 (ITU-T G.652D, G.657A1 or G.657A2) singlemode optical fibres in a 2.95mm Low Smoke Zero Halogen (LSZH) inner jacket with aramid strength members. Aramid non metallic strength members and final 4.5 mm LSZH jacket. Euroclass Eca

FLAT DUPLEX FIBER OPTIC PATCH CABLE

Flat Duplex Fiber Optic Patch Cable is constructed of two simplex units, held together with an overall LSZH jacket. It is ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets). Made of 900 µm buffered fiber, the cable unit is suitable for use with industry standard connectors and can be easily made into a patch cord. These cables are used in making patchcords, pigtails and internal inter-connections.

ROUND DUPLEX FIBER OPTIC PATCH CABLE

Round duplex fiber optic patch cable is constructed with two tight buffered fibers protected by aramid yarns and an LSZH jacket. This cable is available in Riser, Plenum, both RoHS compliant. Ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets). Utilising 600 µm or 900 µm buffered fiber, the cable unit is suitable for use with industry standard connectors and can be easily made into a patch cord.

SIMPLEX FIBER OPTIC PATCH CABLE

A simplex fiber optic cable consists of one single strand of glass of plastic fiber and one single outer jacket. Utilising 600 µm or 900 µm buffered fiber, the cable is suitable for use with industry standard connectors and can be easily made into a patch cords. Simplex fiber is most often used for applications that only require one-way data transfer. Digital data readouts, interstate highway sensor relays, and automated speed and boundary sensors (for sports application) are all great uses of simplex fiber optic cable. There are available in simplex single mode and simplex multimode fiber optic cable. Single mode simplex fiber patch cable is a great option for setting up a cable network that will require data to travel in one direction over long distances. Since this simplex optical fiber cable only carries one ray of light at a time, it’s better for long-distance transmissions. The simplex multimode fiber has a larger diameter core that effectively allows multiple modes of light to propagate. The number of light reflection is created due to a larger diameter. Multimode fiber is used for short distance data transmission purposes.

ZIP DUPLEX FIBER OPTIC PATCH CABLE

Zip Duplex fiber optic patch cable is constructed with two simplex units joined together with a central web. Utilising two 600µm or 900µm buffered fiber, the cable is suitable for simultaneous, bi-directional data transfers over long distances with reliability and high speed. The cable is suitable for use with industry standard connectors and can be easily made into a patch cord. Ideal for use in office LAN connections, patch cords, pigtails and internal point-to-point links where frequent handling is likely (e.g. data cabinets, equipment rooms, user outlets).

BREAKOUT FIBER OPTIC CABLE (4-24 FIBERS)

In breakout cable, a tightly buffered fiber is surrounded by aramid yarn and a jacket, typically PVC. These single-fiber subunit elements are then covered by a common sheath to form the breakout cable. They are made of several simplex cables bundled together inside a common jacket. This is a strong and rugged design. It is suitable for conduit runs, riser and plenum applications. It’s perfect for industrial applications where ruggedness is needed. “The cable within a cable” and because each fiber is individually reinforced, this design allows for quick termination to connectors and does not require patch panels or boxes. Breakout cable can be more economic where fiber count isn’t too large and distances too long, because is requires so much less labor to terminate. Breakout cable is a favorite where rugged cables are desirable or direct termination without junction boxes, patch panels or other hardware is needed.

SECONDARY COATED 900 MICRON FIBER

D-CONNECT offer 900 µm buffered pigtail range OM1, OM2, OM3, OM4 multimode or OS1 / OS2 (ITU-T G.652D / G657A1 / G657A2) single mode. Fiber Optic Pigtails are used for terminating fiber optic cables by splicing one end to the fibers of another cable (within splice trays or in other protected environments) and connecting the other end, which is supplied with a connector to a patch panel or directly to equipment. These fibers are available in either standard or easy-strip formats and in twelve different colors for easy identification.

FTTH FLAT DROP CABLE

D-CONNECT Flat FTTH Drop Cable is used in high speed and broadband telecommunication applications. It is suitable for both indoor and outdoor applications. The indoor fiber construction comprises of 1, 2, 4 cores optical fibers, 2 parallel FRP (Fiber Reinforced Steel/Plastic) strength member and LSZH Jacket. Outdoor FTTH flat cable construction is similar to the indoor cable, except the cable jacket is made of Flame Retardant Black PE and has a supporting wire for aerial installation.
Fiber used in these cables are bend insensitive and can be used for applications where multiple bends are present. These light weight cables are suitable for direct installation in Villas, Multi dwelling units and have excellent crush and impact resistance properties. 1 Core to 12 core drop cables are available.

OPTICAL DISTRIBUTION FRAME

ComingSoon!

FLOOR STANDING NETWORK CABINET

ComingSoon!

WALL MOUNT NETWORK CABINET

ComingSoon!

SLIDING PATCH PANEL

D-CONNECT’s rack mount fiber sliding patch panel is designed to fit on a standard 19″, 21” and 23” rack or optical fiber distribution frames, and provide optimal protection for your fiber optic cable. There are two cable entry points on the back of the fiber housing fitted with rubber grommets to protect the fiber optic cable from damage. Upon on customer’s request, it can be loaded with up to 48 connections, each fiber enclosure includes one cable routing spool and 24 fiber splice tray.

SPLITTER PANEL

D-CONNECT provide variety of Rack Mount PLC Splitters in form of 1U 19″ rack mount enclosures. They are also available in the form of wall-mount box with fiber diameter up to 3 mm. The Rack Mount PLC Splitter is suitable for FTTx projects, CATV or data communication centers. SOPTO supplies Rack Mount PLC Splitter that features Low insertion loss, Low PDL, Excellent splitting uniformity, Wide wavelength range, High Reliability and Stability, and Telcordia Compliance.

We also provide variety of PLC Splitters in form of standard LGX metal box, the PLC splitter products are terminated and/or pluggable. The standard LGX metal box features small compact and flexible configuration. LGX Box PLC Splitters are key components in FTTX networks and responsible to distribute the signal from central office to number of premises. It’s operating wavelength from 1260nm to 1650nm, the LGX Box PLC Splitter can be utilized in in-ground and aerial pedestals well as rack mount systems.

FIBER TERMINATION BOX - 2 CORES

Fiber access termination box is able to hold up to 2 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 4 CORES

Fiber access termination box is able to hold up to 4 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 6 CORES

Fiber access termination box is able to hold up to 6 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 8 CORES

Fiber access termination box is able to hold up to 8 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 12 CORES

Fiber access termination box is able to hold up to 12 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 16 CORES

Fiber access termination box is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 24 CORES

Fiber access termination box is able to hold up to 24 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 32 CORES

Fiber access termination box is able to hold up to 32 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 36 CORES

Fiber access termination box is able to hold up to 36 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 48 CORES

Fiber access termination box is able to hold up to 48 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

FIBER TERMINATION BOX - 64 CORES

Fiber access termination box is able to hold up to 64 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid SMC protection box.

FIBER TERMINATION BOX - 72 CORES

Fiber access termination box is able to hold up to 72 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid SMC protection box.

FIBER TERMINATION BOX - 96 CORES

Fiber optic distribution box is applicable to fiber connection and distribution in fiber distribution network. The material is engineering plastic, good appearance and safe lock-structure, easy installation.

FIBER ROSETTE - 1 CORES

Fiber rossette box is able to hold up to 1 subscribers. It is used as a termination point for the drop cable to connect with patch cable in FTTH indoor application. It integrates fiber splicing, termination, storage and cable connection in one solid protection box.

FIBER ROSETTE - 2 CORES

Fiber rossette box is able to hold up to 2 subscribers. It is used as a termination point for the drop cable to connect with patch cable in FTTH indoor application. It integrates fiber splicing, termination, storage and cable connection in one solid protection box.

FIBER ROSETTE - 4 ~ 8 CORES

D-Connect’s FTTH Fibre rosette box series fiber rossette box is able to hold up to 4 subscribers. It is used as a termination point for the drop cable to connect with patch cable in FTTH indoor application. It integrates fiber splicing, termination, storage and cable connection in one solid protection box.

LOCKABLE WALL BOX
SC / LC ADAPTER

Comingsoon!

LOCKABLE WALL BOX
ST / FC ADAPTER

Comingsoon!

LOCKABLE DOUBLE DOOR WALL BOX
SC / LC ADAPTER

Comingsoon!

LOCKABLE DOUBLE DOOR WALL BOX
ST / FC ADAPTER

Comingsoon!

TAMPER PROOF WALL BOX

Comingsoon!

SPLICE TRAYS

Comingsoon!

CABLE BAR WITH HOOPS

Comingsoon!

SPLICE PROTECTION SLEEVE

Comingsoon!

SPLICE BRIDGE

Comingsoon!

BUNNY CLIPS

Comingsoon!

CAGE NUTS

Comingsoon!

FIBER MANAGEMENT SPOOLS

Comingsoon!

SC CONNECTOR

D-CONNECT manufactures a range of SC connectors suitable for various applications. SC connectors are used in most of the newer network applications and with less parts and a plastic body it offers an economical option. The SC connectors are available in singlemode for both PC and APC and in multimode PC. The connectors come with standard D-CONNECT boots suitable for 900µm, 2mm and 3mm cable diameters.

The D-CONNECT SC connector is available in standard colours including blue, green and beige

LC CONNECTOR

The D-CONNECT LC connector is a small form factor fibre optic connector. The LC connector helps to reduce space on panels or outlets by 50%. It is cost effective as it simplifies movement, addition and modification. It uses the standard RJ-style telephone connector which gives an audible click upon engaging.

D-CONNECT manufactures a range of LC connectors suitable for various applications. The LC connector uses a 1.25mm ferrule which is half the diameter of the standard ferrule. The D-CONNECT LC connectors are available in singlemode for both PC and APC and in multimode PC. The connectors come with standard boots suitable for 900um and 2mm cable diameters. The connector are also available in simplex and duplex (with clips) options.

ST CONNECTOR

The ST connector has a quick release bayonet style body and spring loaded ferrule. ST connectors are commonly used in networking applications.

D-CONNECT manufactures a range of ST connectors suitable for various applications.

D-CONNECT ST connectors are available in singlemode PC and multimode PC.The connectors come with standard boots suitable for 900µm, 2mm and 3mm cable diameters.

FC CONNECTOR

The D-CONNECT FC features a 2.5 mm ferrule and a threaded coupling nut, for a secure connection in high vibration environments and in lab testing for consistent results.

D-CONNECT manufactures a range of FC connectors suitable for various applications.

The FC connectors are available in singlemode both PC and APC and multimode PC. The connectors come with standard D-CONNECT boots suitable for 900µm, 2mm and 3mm cable diameters. The FC connectors are available in standard colours like blue, green and beige.

SC FIC

Comingsoon!

LC FIC

Comingsoon!

ST FIC

Comingsoon!

SC ADAPTER

D-CONNECT offers a range of high quality SC adaptors which have high precision alignment sleeves for reliability and improved reconnectability. For singlemode applications a ceramic sleeve is supplied to ensure a high precision alignment. For multimode applications a phosphor bronze sleeve is supplied. The housing is available in different colours with options for flange or flangeless body, metal clips or inbuilt clips.

LC ADAPTER

D-CONNECT offers a range of quality LC adaptors which have high precision alignment sleeves for improved reliability and better reconnectability. The LC adaptors come with ceramic sleeves for singlemode and phosphor bronze sleeves for multimode. The housing is available in different colours with options for flange or flangeless body and metal, or inbuilt, clips.

ST ADAPTER

D-CONNECT ST adaptors have high precision alignment sleeves for reliability and better reconnectability. ST adaptors come with a ceramic sleeve for the singlemode and phosphor bronze sleeve for the multimode. The housing is available in single D or double D types.

FC ADAPTER

D-CONNECT offers a range of high quality FC adaptors which have precision alignment sleeves for high reliability and better reconnectability. FC adaptors come with ceramic sleeves for the singlemode and phosphor bronze sleeve for the multimode. The housing has a metal body and a M8 nut.

MTRJ ADAPTER

Comingsoon!

MPO / MTP ADAPTERS

Comingsoon!

LSH ADAPTER

D-CONNECT offers a range of high quality LSH adaptors which have high precision alignment sleeves for reliability and better reconnectability. Each LSH connector has an inbuilt mechanism to open the shutter and guide the ferrule in the alignment sleeve. LSH adaptors come with a ceramic sleeves for the singlemode and phosphor bronze sleeves for the multimode. The housing is available in different colours and a flangeless body option.

HYBRID ADAPTERS

We supply various kinds of hybrid fiber optic adapters, including the FC, ST, SC, LC, MU, DIN series. These hybrid fiber adapters are single mode and multimode types, with PC or APC sleeves, in simplex and duplex style. They are widely used in the fiber optic links.

Hybrid fiber optic adapters offer a solution for hybrid applications where the two different kinds of fiber connectors or cable assemblies need to be linked with each other. Most of the hybrid fiber adapters use high precision ceramic sleeves which enable reliable ferrule mating and ensure low insertion loss and return loss during the linking.

SHUTTERED ADAPTERS

D-CONNECT SC shuttered adaptor integrates safety features suitable for FTTH and other telecom applications. It has a high precision zirconia alignment sleeve designed for high reliability and excellent reconnectability in all singlemode networks. It has an spring loaded plastic shutter for laser safety and dust protection. The shutter displays a warning label to indicate laser risk. The adaptors are available in standard colours and packaging.

PLUG TYPE ATTENUATORS

D-CONNECT’s fiber attenuator series include: plug-type fixed value attenuator (Female to Male), Variable Attenuator, Bulkhead-Fixed Value Attenuator (Adaptor), Handheld Variable Attenuator etc.; SC, FC, LC, ST, MU, D4, DIN, MTRJ connector types and PC/UPC/APC interfaces are available; The attenuation ranges are from 1dB up to 30dB

Sometimes in the fiber optic network, people may need to reduce or balance the power of the light transmitted from one device to another device, fiber optic attenuators are used in such cases, they are able to control the output of the fiber light power level. Fiber optic attenuators are used for reducing the power of the light in the fiber optic network. we supply two types fiber optic attenuators, fixed value fiber optic attenuator refer to the attenuator that can reduce the power of fiber light at a fixed value loss, for example, 2dB.

INLINE VARIABLE ATTENUATOR

We supply both single mode inline fiber optic attenuator and multimode inline fiber optic attenuator, types include SC, ST, FC, LC, MU, MTRJ, E2000, etc. they are with fixed attenuation value from 1dB to 30dB optional.

Single mode inline fiber attenuator can operate in the wavelength range of 1260dB to 1620dB, with typical 9/125 SMF cable, the connector types can be UPC or APC, typical fiber cable is 3mm outer diameter.

Multimode inline fiber attenuator can be with 50/125 MMF or 62.5/125 MMF cables, they operate at the typical wavelength of 850nm or 1300nm. Attenuation tolerance is at +-0.5dB. These inline fiber optic attenuators can operate at -40°C to 75°C.

Our inline fiber optic attenuators feature superior durability and they are fully compatible to Telcordia GR-910-CORE standards. The inline attenuators are competitive prices and fast delivery.

SFP

Comingsoon!

SFP+

Comingsoon!

QSFP+

Comingsoon!

QSFP28

Comingsoon!

FBT SPLITTER

Fiber optic splitter, also known as a beam splitter, is based on a quartz substrate of an integrated waveguide optical power distribution device, similar to a coaxial cable transmission system. The optical network system also needs to be an optical signal coupled to the branch distribution. In which requires the fiber optic splitter is one of the most important passive devices in the optical fiber link, is optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH etc.) to connect the MDF and the terminal equipment and to achieve the branching of the optical signal. Fused Biconical Taper splitter is one of the most common splitters. As this technology has been developed over time, the quality of FBT splitters is very good and they can be deployed in a cost-effective manner. FBT splitters are widely accepted and used in passive networks, especially for instances where the split configuration is smaller (1×2, 1X4, 2×2, etc.)

PLC SPLITTER

Comingsoon!

CWDM OADM

The OADM modules allows you to build complex networks establishing dedicated channels between locations based on the use of individual wavelength transmission. CWDM OADM is designed to optically add/drop one or multiple DWDM channels into one or two fibers. Our CWDM OADM Modules include 1CH CWDM OADM, 2CH CWDM OADM, 4CH CWDM OADM... Available in Plastic ABS Box, 19″ Rack Mount and LGX module package. Whether your network has 1 or 2 cores of fiber, redundant network, ring or linear network design etc, we can offer various OADM configurations to tailor fit your network architect. 

D-CONNECT provides whole series of 1xN CWDM products that are tailored for specific applications. All products meet GR-1209-CORE, GR-1221-CORE and ITU-T G.694.2 requirements.

CWDM MUX & DEMUX

CWDM Mux/Demux modules provides the most robust and low-cost bandwidth upgrade for your current fiber optic communication networks. The core of CWDM Module application is the passive MUX/DEMUX unit. CWDM MUX/DEMUX are available in 4, 5, 8, 9, 16, 18 channel configurations. Each CWDM module supports ESCON, ATM, Fibre Channel, and Gigabit Ethernet over each port.. Available in  ABS box package, LGX pakcage and 19” 1U rackmount. Optional wide band port for existing 1310nm or 1550nm port is available to multiplex with these CWDM Channels. Our CWDM Mux/Demux modules provide low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.

The OADM modules allows you to build complex networks establishing dedicated channels between locations based on the use of individual wavelength transmission. CWDM OADM is designed to optically add/drop one or multiple DWDM channels into one or two fibers. Our CWDM OADM Modules include 1CH CWDM OADM, 2CH CWDM OADM, 4CH CWDM OADM. Available in Plastic ABS Box, 19″ Rack Mount and LGX module package. Whether your network has 1 or 2 cores of fiber, redundant network, ring or linear network design etc, we can offer various OADM configurations to tailor fit your network architect. 

Sopto provides whole series of 1xN CWDM products that are tailored for specific applications. All products meet GR-1209-CORE, GR-1221-CORE and ITU-T G.694.2 requirements. Sopto mux/demux modules provide band-based wavelength add-drop of up to 8 DWDM wavelengths or 4 CWDM wavelengths and can be cascaded together using an expansion port architecture to provide modular and scalable add/drop functionality.

DWDM OADM

DWDM Add/Drop multiplexer(OADM) modules provide the ability to add or drop a single wavelength or multi-wavelengths from a fully multiplexed optical signal. These DWDM OADM modules allow intermediate locations between remote sites to access the common, point-to-point fiber segment linking them. Wavelengths not dropped, pass-through the OADM and continue on in the direction of the remote site. Additional selected wavelengths can be added or dropped by successive OADMS as needed. Available in Plastic ABS Box, 19″ Rack Mount or LGX module package.

DWDM MUX & DEMUX

DWDM MUX/DEMUX modules provides the most robust and low-cost bandwidth upgrade for your current fiber optic communication networks. DWDM Mux/Demux Modules are designed to multiplex multiple DWDM channels into one or two fibers. The common configuration is 4CH DWDM Mux/Demux, 8CH DWDM Mux/Demux, 16CH DWDM Mux/Demux and 32CH DWDM Mux/Demux. D-CONNECT provides high quality DWDM with flat channel bandwidth, flexible channel configuration, low insertion loss and high isolation. All our products are epoxy-free in the optical path, actvie, passive both available. Sopto mux/demux modules provide band-based wavelength add-drop of up to 8 DWDM wavelengths or 4 CWDM wavelengths and can be cascaded together using an expansion port architecture to provide modular and scalable add/drop functionality.

ETHERNET FIBER MEDIA CONVERTER

Comingsoon!

10G MEDIA CONVERTER

Comingsoon!

SFP MEDIA CONVERTER

Comingsoon!

SFP TO SFP MEDIA CONVERTER

Comingsoon!

INDUSTRIAL MEDIA CONVERTER

Comingsoon!

Cat6 Unscreened Patch Cord

D-CONNECT Patch Cords shall meet or exceeds all requirements for CAT6 standard. Compatible with CAT6 keystone jacks and CAT6 patch panel, guarantees 250MHZ broadband transmission. D-CONNECT UTP Patch Cable is a 100 ohm cable, with a PVC or LSZH jacket and four twisted pairs for indoor installations. Patch cord plug shall be clear and contacts shall have industry -standard, ANSI/TIA-1096-A compliant 50 micro inches of gold plating.

CAT6 U/UTP PE Cable

D-CONNECT Category 6 cables well exceeds ANSI/TIA and ISO/IEC Category 6/Class E requirements for Category 6 performance. They comply with all of the performance requirements for current and proposed applications. D-CONNECT Category 6 cables are manufactured and tested to the Category 6 performance standards defined by the standards bodies.

CAT6 U/UTP PVC Cable

D-CONNECT Category 6 cables well exceeds ANSI/TIA and ISO/IEC Category 6/Class E requirements for Category 6 performance. They comply with all of the performance requirements for current and proposed applications. D-CONNECT Category 6 cables are manufactured and tested to the Category 6 performance standards defined by the standards bodies.

CAT6 U/UTP LSZH (ECA) Cable

D-CONNECT Category 6 cables well exceeds ANSI/TIA and ISO/IEC Category 6/Class E requirements for Category 6 performance. They comply with all of the performance requirements for current and proposed applications. D-CONNECT Category 6 cables are manufactured and tested to the Category 6 performance standards defined by the standards bodies.

⇐ Back